HOW TO UPGRADE ORION DNA GO TO ORION PLUS?
![UPGRADE EVOLV SOFTWARE UPGRADE EVOLV SOFTWARE](https://www.lostvape.com/wp-content/uploads/2023/07/UPGRADE-EVOLV-SOFTWARE-1-300x300.webp)
UPGRADE EVOLV SOFTWARE(*zip)
![OPERATION INSTRUCTION OF UPGRADE OPERATION INSTRUCTION OF UPGRADE](https://www.lostvape.com/wp-content/uploads/2023/07/OPERATION-INSTRUCTION-OF-UPGRADE--300x300.webp)
OPERATION INSTRUCTION OF UPGRADE (*PDF)
G10ET YOUR ORION PLUS IN 12 STEPS, 5 MINUTES
(*Only compatible with Windows System)
Please take down the pod before the upgrade.
1
2
3
4
5
3
Install SetupEScribe2_INTL_SP19
![p1 p1](https://www.lostvape.com/wp-content/uploads/2023/07/p1.webp)
P1. Software SP19
![p2 p2](https://www.lostvape.com/wp-content/uploads/2023/07/p2.webp)
p2. Install SP19
4
Then double click on the SP20 and upgrade to the Version 2.0 SP20
![p3 p3](https://www.lostvape.com/wp-content/uploads/2023/07/p3.webp)
P3. Software SP20
![p4 p4](https://www.lostvape.com/wp-content/uploads/2023/07/p4.webp)
P4. Upgrade to SP20
5
Step 5- Make sure the software installed is the V2.0 SP20
![Help-About EScribe Help-About EScribe](https://www.lostvape.com/wp-content/uploads/2023/07/Help-About-EScribe.png)
Open the software installed, Choose “ Help-About EScribe”.
![p5 p5](https://www.lostvape.com/wp-content/uploads/2023/07/p5.webp)
P5. V2.0 SP20 EScribe
6
7
8
6
Choose language
![p6 p6](https://www.lostvape.com/wp-content/uploads/2023/07/p6.webp)
P6. Choose Language
7
When connecting to USB, the connection will be prompted, click ok
(Tips: If there’s no prompt when you connect the second time, select Evolv DNA GO at the bottom.)
![p3 p3](https://www.lostvape.com/wp-content/uploads/2023/07/p3.webp)
P7. SP20
8
Choose “Tools – Production Utility”
![p8 p8](https://www.lostvape.com/wp-content/uploads/2023/07/p8.webp)
P8. Tools-Production Utility
9
10
9
Log in your EScribe account or Regist
Account: info@lostvape.com Password: lostvape
![p9 p9](https://www.lostvape.com/wp-content/uploads/2023/07/p9.webp)
P9. Log in
10
Click browse and select the firmware and files to upgrade
![p10 p10](https://www.lostvape.com/wp-content/uploads/2023/07/p10.webp)
P10. Browse and Select from “Firmware&settings” File
(Tips: If there’s no prompt when you connect the second time, select Evolv DNA GO at the bottom.)
Firmware&Settings
Choose “Firmware&Settings files” from the zipfiles you downloaded
![p11 p11](https://www.lostvape.com/wp-content/uploads/2023/07/p11.webp)
P11. Files’ position
![p12 p12](https://www.lostvape.com/wp-content/uploads/2023/07/p12.webp)
P12. Firmware Files
![p13 p13](https://www.lostvape.com/wp-content/uploads/2023/07/p13.webp)
P13. Settings Files
11
12
11
Please cancel the “Fire test” and “Battery test”
![p14 p14](https://www.lostvape.com/wp-content/uploads/2023/07/p14.webp)
P14. Cancel the “Fire test” and “Battery test”
12
Click “Program&Test” button and start upgrade
![p15 p15](https://www.lostvape.com/wp-content/uploads/2023/07/p15.webp)
p15. Click “Program&Test” and finish
When the device flashes green light, the upgrade is successful
(Tips: Do not touch the USB cable during the upgrade process.)
![p16 p16](https://www.lostvape.com/wp-content/uploads/2023/07/p16.webp)
p16. 5 power levels
Having problems while upgrade?
Send an email to support@lostvape.com with the heading “Upgrade Problem” and we’ll get back to you in three work days.